SAMSAN 3D Series

เครื่องวัดค่าน้ำ SAMSAN 3D Series การออกแบบชิปเสียบเดียวอัจฉริยะ การปรับค่าสอดค้นอัตโนมัติ การปรับค่าสอดค้นอุณหภูมิอัตโนมัติหรือควบคู่กับการปรับค่าสอดค้นอุณหภูมิด้วยวิธีคู่มือ การแสดงแสงหลังปรับค่าสอดค้น การแสดงค่า pH และการวัดอุณหภูมิพร้อมกัน

SAMSAN 3D Series is Intelligent single chip design, automatic calibration, automatic or manual temperature compensation. Backlight display, simultaneous display of pH and temperature measurement.

เครื่องวัดค่าน้ำ SAMSAN 3D Series

เครื่องวัดค่าน้ำ SAMSAN 3D Series การออกแบบชิปเสียบเดียวอัจฉริยะ การปรับค่าสอดค้นอัตโนมัติ การปรับค่าสอดค้นอุณหภูมิอัตโนมัติหรือควบคู่กับการปรับค่าสอดค้นอุณหภูมิด้วยวิธีคู่มือ การแสดงแสงหลังปรับค่าสอดค้น การแสดงค่า pH และการวัดอุณหภูมิพร้อมกัน 

SAMSAN 3D Series

SAMSAN 3D Series is Intelligent single chip design, automatic calibration, automatic or manual temperature compensation. Backlight display, simultaneous display of pH and temperature measurement. Electrode slope display after calibration.

Model

Catalog Number Model Description
3D-01 SAMSAN
PHS-3D
pH meter + 201-C combination electrode + buffer solution + adapter
3D-02 SAMSAN
PHS-3D
“pH meter + 201B-F pH/ATC trinal combination electrode + model 600 electrode holder + buffer solution + adapter”
3D-03 SAMSAN
PHS-3D
“pH meter + 201B-F pH/ATC trinal combination electrode + model 601 stirring type electrode holder + ATC electrode + buffer solution + adapter + pH-link communication software”

SPECIFICATION

Model SAMSAN PHS-3D
Range pH: 0.00 to 14.00 pH mV: ± 1999 mV Temp: 0 to 100 C
Resolution pH: 0.1/0.01 pH mV: ± 1 mV Temp: 0.1°C
Accuracy pH: ± 0.01 pH mV ± 0.1% full scale Temp: ± 1˚ c
Temperature Compensation 0 to 100° C (manual or automatic)
Communication Connector RS232 out-put
Storage & Record 25 groups, records the max. and min. value
Power DC 9V/300 mA
Buffer Solution pH 4.00/7.00/10.01
Dimension & Weight 160 x 190 x 70mm/ 750g

DDS-11 C Lab. Conductivity Meter

Automatic calibration, ATC Employing only one conductivity electrode(K=1) to measure the full scale. Ability to select range and switch units automatically.

SPECIFICATION

Model DDS-11C Lab. Conductivity Meter.
Range  0  ̴2×105 μS/cm, divided into 4 ranges: 0  ̴199.94 μS, 2.00  ̴1999 μS, 20.0  ̴19.99mS, 20.0-199.9mS
Accuracy ± 1.0%FS
Temperature Comoensation (0-50° C (manual and automatic)
Data Storage 50 Groups
Power DC9V/300mA
Dimension & Weight 160 x 190 x 70 mm / 750 g
Meter Kits 2301-F Plastic Conductivity Electrode (K=1, ATC), 1408 μS/cm Conductivity Standard Solution (50ml). Model 600 Electrode Holder / 9V Power Adapter